10 Best Medline Wheelchair Replacement Parts (November 2026)
The best Medline wheelchair replacement parts include the Generic Universal Wheelchair Footrest Replacement for swing-away footrests, the ALCO Universal Desk Length for Medline desk arms, and the YZRYXHWL Universal Wheelchair Armrest for screw-in arm pads.
On this page (7 sections)
- How to choose the best Medline wheelchair replacement parts
- Which Medline wheelchair parts fit the most common repairs?
- What should you measure before ordering a replacement?
- How do you set up and care for replacement parts?
- What mistakes lead to the wrong wheelchair part?
- Which replacement should you choose for your repair?
- Best Medline wheelchair replacement parts: which one is right for you?
The best Medline wheelchair replacement parts depend on the worn component, the wheelchair model and the attachment measurements. This guide compares options for footrests, arm pads, wheels, a seat and small repair pieces, with clear checks to make before you order.
The right choice starts with the job at hand rather than the brand name alone. A cracked footplate needs a different answer from a loose hanger pin, and both differ from a worn arm pad or a flat tire.
Medline chairs share a brand, but their parts are not all interchangeable. An Excel wheelchair part may fit one model and miss another, so identify the chair and measure the old part before you choose a replacement.
Check the chair type, the mounting style and the exact dimensions that connect the part to the frame. Those details matter more in daily use than a broad universal label, because a part that will not attach securely cannot do its job safely.
Also note whether the part is sold alone or as a pair. Some repairs need matching left and right components, while others can be fixed with a single plate, pad or pin.
If you are comparing chairs as well as repairs, use our wheelchairs and power chairs buying guide. For a similar parts roundup from another maker, see best Drive Medical wheelchair replacement parts.
Our picks at a glance
-
1
Best for swing-away footrestsGeneric Universal Wheelchair Footrest Replacement
9.7/10 our score
See it on Amazon -
2
-
3
- 4
Best for measured footrest bracketsCheck it - 5
Check itWiykkur 12 Inch Wheelchair Wheels Replacement
Best for transport chair rears - 6
Check itMigeek 20-Inch Wheelchair Replacement Seat
Best for matching seat frames - 7
Check itYZRYXHWL 1 Pair of Universal Footplate
Best for worn footplates - 8
Best for single front castersCheck it - 9
Check itComsenMed Universal Wheelchair footrest Hanger pins
Best for loose footrest hangers - 10
Check itComsenMed Universal 14” Full Arm Pad
Best for long arm supports
How to choose the best Medline wheelchair replacement parts
Start by identifying the job the part must do, then use measurements and connection style to narrow the choices. A part that looks similar can still fail to mount if its holes, axle, bracket or tube differ.
First, find the chair's model label and note whether it is a manual wheelchair, transport chair or power chair. The product options here vary by chair type, and some are explicitly unsuitable for power chairs.
Next, look at the worn component while it is still attached, if doing so is safe. Take photos of its orientation and mounting points, then measure the old part before removing it.
For paired parts, compare both sides because one side may have been replaced or adjusted previously.
Record the measurements that matter for that component:
- For arm pads, measure the pad length and the distance between screw holes, center to center.
- For footrests, measure the hinge bracket spacing, pin spacing or connecting tube diameter, depending on what you are replacing.
- For wheels, compare diameter, tire width, axle or bearing size, hub width and whether the wheel is a front caster or rear wheel.
- For a seat, measure the fabric area and the distance between the mounting points.
- For hanger pins, inspect the bracket style and compare the pin with the matching side.
Also check what comes in the package. Several products come as pairs, but the ALCO front caster is a single wheel.
That distinction affects whether you can repair one side or need to buy a matching second component separately.
Which Medline wheelchair parts fit the most common repairs?
The right pick depends on whether the damaged component is a full assembly, a replaceable surface or only its fastener. These options cover several common manual chair repairs, but none should be ordered by brand name alone.
Generic Universal Wheelchair Footrest Replacement: Best for swing-away footrests
- Pair of composite footplates
- Heel loops
- Swing-action design
- Cam-lock adjustment
A swing-away pair with heel loops for replacing compatible footrests on standard and transport chairs.
Pros
- Pair included
- Heel loops help keep feet positioned
- Tool-free adjustment
Cons
- Confirm the frame and pin fit before ordering
The Generic footrest pair is the most complete option here for replacing both swing-away footrests. Each has a composite plate and heel loop, and the cam-lock design uses 1.46 in hemi pin spacing.
Choose it if both footrests need replacement and the chair's frame connection matches. The pair is a sensible fit for someone who wants the plates, heel support and swing action together, rather than keeping an old hanger or trying to repair only one small component.
Skip it if you only need a replacement plate or pin, or if your chair's hinge and pin arrangement do not match. The word “universal” does not identify a specific Medline model, so confirm the connection before buying.
For set-up, compare the left and right sides before attaching anything, and follow the chair and replacement instructions. After installation, check that each footrest swings as intended and locks into its normal position before putting weight on it.
ALCO Universal Desk Length: Best for Medline desk arms
- 9-1/8 in desk-length pads
- Pair with black bases
- Two hole spacing options
- For most manual wheelchairs
Desk-length pads with two hole spacing options, identified as compatible with most Medline and other manual wheelchairs.
Pros
- Pair included
- Two hole patterns
- Medline compatibility named
Cons
- Not for power chairs
ALCO's desk-length arm pads are a strong choice when a Medline manual chair uses 9-1/8 in pads and one of the two stated hole patterns. The pair includes black bases, and Medline is among the brands named as compatible.
Pick these for a chair with desk-length arm supports when the mounting holes measure 5-1/2 in or 3-5/16 in apart. The fit information makes this option easier to screen than a general pad with no Medline compatibility named.
Skip them if your chair has full-length arms, uses a power chair arm assembly or has a different hole pattern. These are replacement pads, not a complete armrest assembly, so they will not solve a damaged arm support or frame mount.
Before ordering, measure from the center of one mounting hole to the center of the other. During installation, keep the old pad nearby to compare orientation and replace the screws securely without forcing a screw into a misaligned hole.
YZRYXHWL Universal Wheelchair Armrest: Best for screw-in arm pads
- Pair of 9-1/8 in pads
- Hardware included
- Two hole spacing options
- Black vinyl replacement pads
This arm pad pair includes replacement screws and suits buyers who have measured one of its two hole patterns.
Pros
- Screws included
- Two hole spacing options
- Pair included
Cons
- Check pad length and hole spacing
The YZRYXHWL pads suit a buyer who needs a pair of 9-1/8 in arm pads and wants replacement screws included. They use the same two stated hole spacings as the ALCO desk-length pair: 3-5/16 in and 5-1/2 in.
Choose this option when your measurements match and the old pads can be removed by unscrewing them. It may work for a compatible manual or transport chair, but Medline is not named specifically, so verify the pad shape and attachment points carefully.
Skip it if the chair needs a full armrest or a 14 in pad. Do not assume that matching hole spacing guarantees that the base shape or mounting orientation will suit your particular frame.
Keep the new screws together before you start and compare their length with the old fasteners. Once fitted, check that the pads do not shift when you press gently on them; a loose pad needs attention before the chair is used.
HMZ: Best for measured footrest brackets
- Pair of swing footrests
- Stainless steel construction
- Composite footplates
- Heel loops
A swing footrest pair for buyers whose wheelchair bracket spacing matches the stated 1.5 in measurement.
Pros
- Pair included
- Heel loops included
- Bracket spacing specified
Cons
- Measure bracket spacing before ordering
HMZ's footrest pair fits buyers whose swing hinge brackets measure 1.5 in apart. It includes heel loops and composite footplates, with stainless steel construction described for the footrest assembly.
Choose HMZ when the bracket spacing matches and you need both swing footrests. Its specified bracket measurement gives you a direct check to make before ordering, and the slide-in attachment may suit a straightforward replacement when the chair connection is compatible.
The heel loops can help keep feet from sliding backward during transfers and rides. That small detail matters when the chair is used daily at home, at appointments or in a care setting.
Skip it if your chair has a different bracket spacing, if only a footplate is damaged or if the frame bracket itself is bent. A replacement leg rest cannot correct a damaged chair mount.
Measure between the swing hinge brackets rather than estimating from the outside of the frame. Compare the measurement on both sides, because a previous repair may have left one side different.
When fitted, verify that both sides move freely and stay attached. Stop if a footrest feels loose or will not seat securely, and have the bracket inspected before use.
Check the plates for a firm, level position after fitting. A footrest that sits at an odd angle can make transfers harder and may put pressure in the wrong place.
Wiykkur 12 Inch Wheelchair Wheels Replacement: Best for transport chair rears
- Pair of solid rear wheels
- 12-1/2 x 2-1/4 in model size
- Bolts and tools included
- For manual chairs
A solid-tire wheel pair for manual and transport chairs, with dimensions to compare against your existing wheels.
Pros
- Pair included
- Hardware and basic tools included
- Key dimensions provided
Cons
- Not suitable for electric wheelchairs
The Wiykkur pair is for manual wheelchairs and transport chairs that use the stated rear-wheel dimensions. It includes bolts and basic tools, and the solid tires are made with polyurethane and polypropylene components.
Choose it when both rear wheels need replacement and the chair is manual. It is useful for a buyer who wants a pair and has checked the wheel diameter, axle arrangement and bearing opening against the existing setup.
Skip it for an electric wheelchair. The maker identifies this wheel pair for manual chairs only, and a wheel that attaches physically may still be wrong for a powered chair's design.
Before installation, place the chair on a stable surface and follow the chair's repair guidance. Keep each wheel's hardware organized, confirm the wheels turn freely after fitting, and have a repair provider check the axle if it is bent or damaged.
For other wheelchair wheel options, see best wheelchair replacement wheels. That guide can help when your chair needs a different wheel size or style.
Migeek 20-Inch Wheelchair Replacement Seat: Best for matching seat frames
- 20 x 16 in seat
- Oxford fabric
- Foam filling
- Mounting hardware included
A black replacement seat with foam filling for a chair matching the 20 x 16 in size and mounting layout.
Pros
- Hardware included
- Size stated
- Phillips screwdriver installation
Cons
- Measure the chair and mounting holes first
The Migeek seat is a black, 20 x 16 in replacement with Oxford fabric and foam filling. Its mounting hardware is included, and installation calls for a Phillips screwdriver.
Choose it only when the existing seat dimensions and mounting layout match. The size helps you screen the option, but the hole spacing and chair attachment still need to line up.
The foam filling and fabric are meant to give a softer, more settled seating surface than a worn panel. That can suit a chair that is used for long daily periods, provided the frame and mounts are still sound.
Skip it if the fabric rails or wheelchair frame are bent, if the seat is a different size, or if you cannot confirm its mounting points. A new seat will not repair a damaged frame or restore a chair that needs structural service.
Lay the old seat alongside the replacement before fitting it, and make sure the fabric is oriented correctly. Note which side faces up and how the mounting points line up before you tighten anything.
Tighten the fasteners evenly, then check that the seat lies flat and remains secure when pressed across its surface. A seat that shifts under pressure should be corrected before the chair is used.
YZRYXHWL 1 Pair of Universal Footplate: Best for worn footplates
- Pair of ABS footplates
- Textured surface
- Fits either side
- Tube bracket size specified
A pair of replacement footplates for a compatible assembly when the hanger and bracket remain usable.
Pros
- Pair included
- Textured surface
- Tube bracket size stated
Cons
- Confirm connecting tube diameter
The YZRYXHWL footplates are for replacing the platforms while keeping a compatible footrest assembly. The pair is made of ABS plastic, has a textured surface and can be used on either side.
Pick them if the plate is damaged but the hanger, hinge and connecting assembly remain sound. The tube bracket is 7/8 in, and the platform measures 6.4 x 6.8 in.
The textured surface can help shoes grip the plate during transfers. That grip is useful when getting in and out of the chair, since a smooth worn plate may make the feet slip.
Skip this set if the footrest tube is a different diameter or the assembly itself is bent or loose. These plates do not replace the whole swing-away footrest.
Compare the old plate's position and attachment before removing it. Check the tube diameter carefully, because a close look is more reliable than judging by eye alone.
Once attached, check that the textured side faces up and that each plate is firmly seated before the user rests their feet on it. Clean the plates as directed and check them now and then for cracks or looseness.
ALCO 8" x 1" Heavy Duty Front: Best for single front casters
- 8 x 1 in front wheel
- 5/16 in bearing or axle
- 2-3/8 in hub width
- For manual wheelchairs
A single front wheel identified for most Medline and other manual wheelchairs, with bearing and hub measurements to check.
Pros
- Medline compatibility named
- Bearing and hub measurements stated
- For manual wheelchairs
Cons
- Sold as one wheel
ALCO's front caster is a single 8 x 1 in wheel identified as compatible with most Medline manual wheelchairs. It has a 5/16 in bearing or axle and a 2-3/8 in hub width.
Choose it when one front wheel needs replacement and the wheel, bearing and hub measurements match. The explicit Medline compatibility makes it a relevant option for manual chair owners who need a single caster.
The front wheels guide the chair through turns and over small thresholds. A worn or stiff caster can make pushing harder, so matching the size helps keep the chair moving as it should.
Skip it if you need a pair, if the old caster is a different size or if the chair is powered. A wheel that fits the fork but differs from the other caster can affect how the chair tracks.
Inspect the caster fork and axle while the wheel is off. If either is bent, or the replacement does not spin freely once fitted, pause and have the chair checked instead of forcing the wheel into service.
After fitting, roll the chair a short distance on a flat surface. Listen for rubbing and watch whether the chair pulls to one side.
ComsenMed Universal Wheelchair footrest Hanger pins: Best for loose footrest hangers
- Four hanger pins
- Washers and nuts included
- For steel and aluminum alloy chairs
- For wheelchairs and transport chairs
A small repair set for missing or damaged footrest hanger pins, with the matching washers and nuts.
Pros
- Four complete pin sets
- Fits many manual and transport chairs
Cons
- Confirm the hanger mounting style
The ComsenMed hanger pin set is a small repair option for a missing or damaged footrest pin. It includes four pins with four washers and four nuts, intended for many steel and aluminum alloy wheelchairs and transport chairs.
Choose it when the footrest hanger and frame bracket are intact, and the problem is the pin hardware. The set can address a loose or missing connection without replacing a complete leg rest.
Having spare pins in the set can be handy for a chair used every day. It may also help when one pin is worn and the matching hardware needs to be replaced at the same time.
Skip it if the moon-shaped bracket or frame is bent, cracked or badly worn. The chair's mounting style still needs to match, so compare the existing pin or opposite-side assembly before ordering.
Install pins only as directed for the chair. Keep the washers and nuts with each pin so the sets do not get mixed up during fitting.
Afterward, check that the footrest remains attached when swung and that the pin does not move out of place. If the connection still feels loose, stop use and get the bracket inspected.
ComsenMed Universal 14” Full Arm Pad: Best for long arm supports
- 14 in arm pads
- Pair with hardware
- Four hole spacing options
- For manual wheelchairs and transport chairs
Full-length pads with several hole spacing options for buyers whose chair matches the measurements.
Pros
- Pair included
- Hardware included
- Four hole spacing options
Cons
- Not for power chairs
ComsenMed's full arm pads measure 14 in and come as a pair with hardware. They offer four hole spacing choices: 2 in, 6.8 in, 8.9 in or 10 in.
Choose this option for a manual wheelchair or transport chair that uses full-length pads and matches one of those mounting patterns. It is a more relevant fit than the 9-1/8 in desk-length pads when the original support extends farther along the arm.
The longer pad gives arm and elbow support over a greater length. That can suit a rider who leans on the arm more during transfers or who sits for long stretches.
Skip it if the chair is a power chair or has a different hole spacing. The compatibility is conditional on matching holes, so do not rely on a general all brands description to settle the fit.
Measure both mounting points and compare the old pad's position with the replacement. Check the length as well, since the wrong length can change how the arm rests.
During installation, use the included hardware and confirm the pad stays still before the rider leans on it. Wipe the vinyl clean as directed and check the screws now and then for looseness.
What should you measure before ordering a replacement?
Measure the old part and its connection points, then compare those figures with the replacement's stated dimensions. For wheelchair parts, one measurement is rarely enough to confirm compatibility.
For arm pads, note the pad length, width if relevant to the shape, and center-to-center hole spacing. Also check whether the chair uses desk-length or full-length arms, since a correct hole pattern on a pad of the wrong length will not give the same support.
For footrests, identify what needs replacement first. A complete swing-away assembly connects at the chair's hanger, a footplate attaches to the footrest tube, and a hanger pin secures the leg rest to its bracket.
Measure the exact point where the old part joins the chair.
For wheels, distinguish a front caster from a rear wheel and check the wheel diameter, tire width, axle or bearing opening, and hub width. Confirm the wheelchair type as well.
The Wiykkur wheels are for manual chairs, while the ALCO caster also specifies manual wheelchair use.
For a seat, measure the fabric panel and locate the mounting holes or rails. Record the screw positions and check the chair frame for damage before treating the seat as the only problem.
If a measurement is hard to access or the chair model is unclear, ask Medline or a wheelchair service provider to identify the correct component. A short fit check can prevent ordering a part that cannot attach securely.
How do you set up and care for replacement parts?
Use the wheelchair manual and the replacement instructions for installation, then inspect the attachment before the chair is used. Stop if a part does not align, fasteners will not tighten or the frame connection looks damaged.
Keep tools and small fasteners in a tray so pins, washers and screws do not get lost. Photograph the old part in place before removal, especially for footrests and arm pads that can be installed in more than one orientation.
Do not hammer a part into place or enlarge a mounting hole to force a fit. A part that needs force may have the wrong dimensions, and altering the chair can weaken the attachment.
After installation, check the repaired area with the chair empty. For wheels, confirm the wheel spins without rubbing; for footrests, verify the swing action and lock; for arm pads and seats, press gently to check for movement.
Keep replacement parts clean and dry according to their materials and the chair's care instructions. Check exposed hardware periodically for looseness, and inspect plastic plates and padded surfaces for cracks, tears or movement.
What mistakes lead to the wrong wheelchair part?
The most common buying mistake is treating “universal” as a guarantee. It only suggests broad compatibility; it does not replace measuring the chair's specific hardware.
Another mistake is measuring the overall part but not its mount. Two arm pads can have the same length and different hole spacing, while two footrests can look similar but use different hinge brackets.
Buyers also sometimes confuse the part name with the repair needed. Replacing a footplate will not repair a loose hanger pin, and new hanger pins will not fix a bent frame bracket.
Identify the failed component and inspect the connected parts.
Check package quantity before you order. Most picks here are sold as pairs, but ALCO's front caster is one wheel.
If both sides need repair, plan for a matching part on the opposite side.
Finally, verify the chair type. Manual wheelchair parts may not suit power chairs, and Wiykkur explicitly excludes electric wheelchairs.
When the chair model or attachment remains uncertain, get help before fitting a part that supports the rider.
Which replacement should you choose for your repair?
Choose the part that matches both the damaged component and the attachment measurements. For complete swing-away footrests, compare the Generic pair's pin spacing with HMZ's bracket spacing; for a footplate-only repair, consider YZRYXHWL if its tube size matches.
For desk-length arm pads, ALCO is the clearest option for Medline manual chairs with one of its two hole patterns. Choose the YZRYXHWL pair when its dimensions fit and you want screws included, or the ComsenMed 14 in pair for a longer arm support with matching holes.
For a manual chair's rear wheels, compare the Wiykkur dimensions; for one front caster, check ALCO's axle and hub measurements. The Migeek seat suits a frame that matches its dimensions and mount layout, while ComsenMed's pins address a missing or damaged footrest pin when the bracket is still sound.
If the wheelchair itself is the wrong size or style, use our wheelchair size and seat width guide before investing in parts. For foot support choices, see wheelchair leg rests and elevating leg rests for wheelchairs.
Best Medline wheelchair replacement parts: which one is right for you?
For the best Medline wheelchair replacement parts, start with the part that has failed, then buy only after its measurements and chair type match. Pick a complete footrest pair for a damaged assembly, a plate or pin for a narrow repair, and the arm pad, seat or wheel that matches the chair's actual mount.
Look first at what is worn, cracked, loose or missing. That tells you whether you need a full assembly, a surface part or only small hardware, and it keeps a simple repair from turning into an unnecessary purchase.
Then compare the connection points. Measure hole spacing for arm pads, bracket or pin spacing for footrests, and diameter, bearing and hub size for wheels, while checking seat size and mounting layout for a seat.
Confirm the chair type before you order. Several parts here are for manual wheelchairs or transport chairs, and some are not for power chairs, so a similar looking part may still be the wrong one.
Set the part up carefully and test it with the chair empty. Check swing action on footrests, free movement on wheels, and firm, even support on arm pads and seats before regular use.
Keep the chair clean and check hardware now and then for looseness. Small checks after a repair can spot a problem early, while the fix is still simple.
If you are replacing a seat on a mobility scooter rather than a wheelchair, compare mobility scooter replacement seats and mobility scooter replacement wheels instead. For wheelchair repairs, a precise fit check and secure setup matter more than a broad compatibility label.
Our top 3 picks at a glance
-
1
Best for swing-away footrests
Generic Universal Wheelchair Footrest Replacement
9.7/10 our score
See it on Amazon -
2
-
3
Frequently asked questions
How do I find the right Medline wheelchair replacement part?
Identify the part you need, then compare its measurements and attachment points with the chair. Check wheel diameter and axle or bearing size, seat dimensions and mounting holes, or the footrest bracket spacing.
A Medline name alone does not confirm a fit across every model.
Can universal wheelchair parts fit a Medline chair?
Some parts here name Medline among compatible brands, while others describe a general fit for manual wheelchairs. Treat “universal” as a starting point, then compare the part's exact dimensions and mounting pattern with your chair.
Ask Medline or a wheelchair service provider if the fit remains unclear.
Can I replace a wheelchair seat myself?
A replacement seat may be manageable if its size and mounting points match and you can follow the chair's instructions. The Migeek seat is 20 x 16 in and calls for a Phillips screwdriver.
Stop if the frame, fasteners or seat rails look damaged, and ask a repair professional to check the chair.
How do I know which wheelchair wheels to order?
Compare wheel diameter, axle or bearing size, hub width and chair type with the existing wheel. The Wiykkur pair is for manual wheelchairs and gives several measurements, while the ALCO front wheel is sold individually.
Don't use a manual-chair wheel on an electric wheelchair unless the chair maker confirms compatibility.
