Guide

How Does a Patient Lift Work?

Updated on · By the Senior Learning Network team

A patient lift uses a sling and a lifting mechanism to raise and move someone between surfaces. For how a patient lift works safely, match the lift and sling to the person and planned transfer, then follow their instructions.

On this page (8 sections)
  1. How does a patient lift work step by step?
  2. What parts make a patient lift work?
  3. How should you prepare for a patient lift transfer?
  4. What should you check while using a patient lift?
  5. How do you choose a patient lift that fits?
  6. What common patient lift mistakes should you avoid?
  7. Can a patient lift work for a floor recovery?
  8. Which patient lift should you choose?

A patient lift uses a sling and a lifting mechanism to raise and move someone between surfaces. If you're asking how a patient lift works, the basic answer is that a caregiver positions the sling, connects it to the lift, raises the person, guides the lift, and lowers them onto a bed, chair, commode, or other planned destination.

The lift supports the person's weight during the move. It doesn't steer itself or decide how the person should be positioned, so caregivers need to follow the transfer plan and equipment instructions.

How does a patient lift work step by step?

A patient lift works by supporting a person in a sling attached to a lifting arm. The caregiver prepares the route and destination, fits and connects the sling, raises the person, guides the lift, and lowers them with control.

  1. Prepare the transfer area. Bring the destination within reach for the planned move and clear obstacles from the route.
  2. Position the sling. Place it around or beneath the person as its instructions direct. Sling fit and positioning depend on its style and intended use.
  3. Connect the sling. Attach its straps or loops only to the lift's designated points. Check each connection before raising.
  4. Raise the person. Operate the controls or pump as directed, watching the sling and the person's position.
  5. Guide the lift. Move toward the destination at a controlled pace. Don't pull the person by the sling to steer.
  6. Lower onto the surface. Follow the lift instructions and remove the sling only as directed.

The process differs by lift and sling. Read both sets of instructions before a transfer, and ask a qualified health professional or equipment supplier for help if you aren't sure how to position the sling or whether you need another caregiver.

What parts make a patient lift work?

A floor lift usually has a wheeled base, lifting arm, sling connection points, and a mechanism that raises and lowers the arm. The base supports the lift, while the sling holds the person during the transfer.

Some bases have adjustable legs that caregivers can open or close to approach a wheelchair or furniture. Use any adjustment only as the lift instructions describe, and check the available space before choosing a model.

How does a patient lift raise and lower the person?

An electric lift uses battery power to move its lifting arm. A hydraulic lift uses a hand-operated pump; with either type, the caregiver operates the mechanism and monitors the person and sling throughout the move.

The Joerns Hoyer Advance is a foldable electric lift with a battery-powered mechanism, adjustable base width, and a 340 lb capacity. Its compact, portable design suits caregivers who need to store or move a floor lift between transfers.

{{product B00PXD1ALW}} This product's foldable electric frame and adjustable legs suit caregivers comparing a portable lift for home transfers.

What does the sling do in a patient lift?

The sling supports the person while the lift raises and moves them. It must be compatible with the lift and suitable for the person's needs and the planned transfer.

Sling styles vary in shape, material, attachment points, and intended use. For example, a mesh sling may suit shower transfers, but its fit and connection method still need to match the person and lift.

The Vive Patient Lift Sling is a water-resistant mesh transfer sling with four connection points for use with most floor lifts and three handles underneath to help caregivers reposition the person.

{{product B07JX84WYH}} This product's mesh material and multiple handles suit caregivers looking for a sling for showering and home use.

See our guide to patient lift sling types to compare common sling styles and uses.

How should you prepare for a patient lift transfer?

Prepare by checking the equipment instructions, transfer plan, sling fit, and route between surfaces. A ready destination and a clear path help caregivers work at a steady pace.

Before starting, look for visible damage on the lift and sling. Confirm that the sling is designed for the lift and transfer, and that every connection point is attached as directed.

Make space around the bed, chair, or other destination so the lift can approach as planned. Move obstacles that could catch the wheels, and check that furniture or doorways won't block the route.

Explain the move to the person in a calm, clear way if they can take part. If their needs have changed or the planned transfer no longer seems suitable, pause and ask a qualified professional for guidance.

What should you check while using a patient lift?

Keep following the lift and sling instructions from setup through lowering. Stop if a connection appears loose, the person shifts unexpectedly, or the equipment doesn't move as expected.

Watch the sling as the person rises and as the lift moves. Keep the person positioned as directed, and avoid rushing or pulling on the sling to correct the lift's path.

A lift's stated capacity is only one part of the fit. Check the lift and sling capacities, their compatibility, and the person's transfer plan before use.

The Invacare Hydraulic Patient Lift uses a hand-operated pump and has a stated 450 lb capacity. Its bent mast and floor-to-bed lifting range may appeal to caregivers comparing a manual lift, but suitability depends on the actual transfer and instructions.

{{product B075JZDSWZ}} This product's hand-operated pump suits caregivers comparing a hydraulic floor lift for home transfers.

How do you choose a patient lift that fits?

Choose by matching the lift's mechanism, capacity, sling compatibility, and base to the person, caregiver, room, and transfer. For assisted standing transfers, compare sit-to-stand patient lifts.

Start with the move you need to make, then check whether a candidate lift is designed to do it.

  • Choose electric if battery-powered lifting suits the caregiver and transfer setting. The Joerns Hoyer Advance folds for storage and has a pedal to adjust its leg width.
  • Consider hydraulic if a hand-operated pump fits the caregiver's ability and routine. The Invacare model has a stated 450 lb capacity, but capacity alone doesn't confirm fit.
  • Check portability and storage. A foldable lift can help when it needs to be stored or transported. Confirm that its folded form and weight work for the caregiver and available space.
  • Match the sling to the transfer. Confirm compatible attachment points, suitable sling style, and capacity. The Vive mesh sling is intended for showering and home use, but check that it suits the specific lift.
  • Measure the route. Check room around the bed, chair, or commode, along with doorways and turns on the way to the destination.

If the person needs a transfer from the floor, verify that the lift and sling instructions allow it. For more options, compare patient lifts for home use and portable patient lifts.

See how much a patient lift costs when planning the equipment budget.

If you're comparing equipment for everyday movement, our mobility aids for seniors buying guide covers other types of support. Patient lifts move people; vehicle lifts carry mobility scooters, so they solve different problems.

For scooter transport, see our mobility scooter lift guide and mobility scooters for bariatric patients.

What common patient lift mistakes should you avoid?

The most common mistakes are using an incompatible sling, skipping a connection check, moving too quickly, and assuming a lift can do every kind of transfer. Slow down and follow the equipment instructions at each step.

Don't choose a sling based on appearance alone. Compare patient lift sling options by attachment points, fit, intended use, and capacity.

Check its attachment points, fit, intended use, and capacity against the lift and transfer plan.

Don't assume that two lifts with similar capacities are interchangeable. Their controls, base adjustments, lifting range, and setup directions can differ.

Don't improvise a floor recovery after a fall. If the person may be injured or unwell, seek appropriate medical help, then follow professional guidance about any transfer.

Can a patient lift work for a floor recovery?

Some lifts can reach a person on the floor, but the model and sling must be suitable for that specific transfer. Check the instructions and the person's care plan before attempting recovery.

The Invacare Hydraulic Patient Lift is described with a floor-to-bed height range. That feature may matter for recovery planning, but it does not confirm that the lift suits every person or circumstance.

Which patient lift should you choose?

Choose the Joerns Hoyer Advance if you need a foldable electric lift for planned home transfers and its capacity and dimensions fit your setup. Consider the Invacare hydraulic lift if a hand-pumped model fits the caregiver's needs and the person-transfer plan.

Choose the Vive sling only when its mesh design, attachment points, and capacity suit both the lift and planned use. To decide how a patient lift works for your home, begin with the transfer, then confirm sling fit, caregiver support, and room clearance with the equipment instructions or a qualified professional.

Frequently asked questions

How does a patient lift work?

A patient lift raises and lowers a person in a sling attached to a lifting arm. A caregiver positions and connects the sling, operates the lift, guides it to the destination, and lowers the person onto the new surface.

Follow the lift and sling instructions for each transfer.

Can one caregiver use a patient lift?

It depends on the person's needs, the lift, and the transfer plan. Some situations require a second caregiver, and some lifts or slings have specific caregiver instructions.

Follow the equipment instructions and ask a qualified health professional or equipment supplier what support a particular transfer requires.

What is the difference between an electric and hydraulic patient lift?

An electric patient lift uses battery power to raise and lower the lifting arm. A hydraulic lift uses a hand-operated pump.

Both require a compatible sling and a caregiver to position the equipment and guide the transfer.

The right type depends on the transfer setting and the equipment user's needs.

Does a patient lift work with any sling?

No. Check that the sling is compatible with the lift and suitable for the person and transfer.

Sling styles, attachment points, and intended uses vary, so follow both manufacturers' instructions and confirm fit before lifting.

See our guide to patient lift sling types for a closer look at the options.