How to Fix a Lift Chair That Won't Go Down
If your lift chair won't go down, check the outlet, visible power connections, and remote. Keep clear of moving parts, and call the chair maker or a repair professional if those checks don't restore movement.
On this page (10 sections)
- What should you check first when a lift chair won't go down?
- Why does a lift chair go up but not down?
- What if the lift chair has no power?
- Could the actuator be causing the problem?
- How should you choose a replacement part?
- How can you set up a replacement safely?
- What care and use habits help prevent problems?
- What mistakes should you avoid?
- When should you call for lift chair repair?
- How do you decide what to do when your lift chair won't go down?
If your lift chair won't go down, check its power, visible connections, and remote before considering a replacement part. Don't force the chair or reach beneath it.
If these basic checks don't restore movement, contact the chair maker or a repair professional.
A chair that rises but won't lower may have a remote, cable, control, or actuator problem. Start with checks you can do safely from outside the chair, and match any replacement part to the chair's model and electrical requirements.
What should you check first when a lift chair won't go down?
Check the outlet and visible power connections, then try the remote once with the area around the chair clear. Follow the chair manual, and don't move the chair or reach under it while it is powered.
- Make sure the outlet is switched on, if it has a switch.
- If it is safe, check whether another device works in the outlet.
- Look for loose connections between the wall cord, power supply, and chair.
- Check the remote cable where it joins the chair or control box.
- Press the down button once, keeping hands, feet, and objects clear of the footrest and frame.
Don't tug cables to make a connection. Unplug the chair before reseating connectors if the manual allows it, and keep plugs and connections dry.
If you use other mobility aids for seniors, keep a clear path around the chair while it is stuck. Don't use another aid to pull or push the chair mechanism.
Why does a lift chair go up but not down?
Movement in one direction suggests a remote, cable, control, or mechanism problem, so avoid repeated button presses if the chair strains or sounds unusual. A chair that moves up may still have an issue that makes lowering unsafe.
Check whether the down button feels damaged or stuck. Look at the remote cable for cuts, crushed sections, or sharp bends, but don't open the handset or chair to inspect the wiring.
A compatible replacement remote may help if the handset is damaged. Compare the chair's connector and model information with our guide to lift chair remote replacement options.
Can a replacement remote fix a lift chair that won't lower?
A replacement remote can help when the original handset is the problem and the new remote matches the chair's control system. The connector shape alone may not confirm compatibility.
The Hommoat remote has 2 lighted buttons and a coiled cable that extends 59–67 in. It's intended for a lift chair or recliner with a 5-pin actuator plug.
{{product B08R3BGTWH}} The listing describes a 2-button remote for a lift chair with a matching 5-pin actuator connection.
Check the chair manual or ask its maker to confirm the required remote before buying. Our guide to lift chair accessories covers other parts and add-ons that may fit your needs.
What if the lift chair has no power?
If the chair won't move in either direction, check the outlet and visible power connections first. A disconnected cord or power supply can stop movement, but a working outlet doesn't rule out a fault inside the chair.
If the power supply has an indicator light, check whether it is on. The Sopito supply has a 2-pin connection, an output of 29V DC at 2A, and a 4 ft power cord.
{{product B01D9W9ZWO}} The listing describes a 29V DC supply for a chair that requires a matching 2-pin connection and electrical specifications.
Before choosing an adapter, confirm the chair's required voltage, current, connector, and cable setup. Sopito says this supply works with most lift chairs, but it isn't compatible with theater chairs.
Its motor-to-transformer cable is sold separately.
Don't choose a power supply just because its plug fits. If you can't confirm the chair's electrical requirements, contact the maker or a qualified repair professional.
Could the actuator be causing the problem?
A chair with power that doesn't respond may have a control or actuator fault. Because replacement parts must match the chair, don't remove panels or disconnect wiring to identify the problem unless the manual specifically tells you how.
If the chair is stuck raised, keep people and pets away from the footrest and frame. Ask the maker or a repair professional for instructions on how to handle it safely.
If a repair professional confirms the actuator needs replacing, compare the chair's part details with replacement lift chair actuators. A similar-looking part may not match the chair's motor or controls.
How should you choose a replacement part?
Choose a remote or power supply only after confirming the part type and the chair's matching connector and electrical requirements. The chair manual, labels on existing parts, or the manufacturer's support team can help you identify what it needs.
For a remote, check the number and type of pins, the connector, and the chair's control system. The Hommoat remote is intended for chairs with a 5-pin actuator plug, so skip it if your chair uses a different connection or the maker can't confirm compatibility.
For a power supply, match the voltage, current, and connector. The Sopito adapter is intended for chairs that use a 29V, 2A supply with a 2-pin connection.
Skip it if any requirement differs or is unknown.
A replacement is most useful when the problem points to a failed external part and the chair maker confirms the match. If the chair still won't move after basic checks, or if the cause is unclear, arrange service instead of ordering parts by appearance.
How can you set up a replacement safely?
Set up a replacement only with the chair unplugged and the correct part in hand. Follow the chair maker's instructions, and don't work under a raised seat or around a moving mechanism.
Place the chair where its cord can reach the outlet without being stretched or pinched. Keep the footrest and frame clear of furniture, cords, and loose items, then connect parts as directed by the manual.
After setup, plug the chair in and check for an indicator light if the power supply has one. Keep clear of the mechanism while checking whether the chair responds normally.
Stop if a connection becomes hot, a cable looks damaged, or the chair makes unusual sounds.
What care and use habits help prevent problems?
Keep the chair's power connections dry, cords unpinched, and moving parts clear. Check visible cables now and then, especially after moving the chair or cleaning around it.
A recliner cover can protect the fabric while a chair is being repaired, but it won't fix a control or power problem. The VANSOFY cover is waterproof and has 3 pockets on the right side for a remote or phone.
It fits chairs with a seat width up to 23.6 in, so measure first and keep the cover away from moving parts.
{{product B0BNDSH5V2}} The listing describes a waterproof recliner cover with side pockets for keeping a remote close at hand.
Follow the chair maker's care guidance for cleaning and operation. Don't use a cover that blocks the controls, catches in the mechanism, or prevents you from seeing a damaged cord.
What mistakes should you avoid?
Don't force the chair down, repeatedly press the button, or reach beneath the seat to free a stuck mechanism. These actions can put you near moving parts or make an electrical problem harder to diagnose.
Avoid these common errors:
- Buying a remote because its connector looks similar without confirming the control system.
- Using a power supply with a matching plug but different electrical requirements.
- Pulling, twisting, or taping a damaged cable to keep it connected.
- Opening the chair or handset without instructions from the maker.
- Testing the chair while someone is seated in it or standing near the footrest.
If liquid reaches electrical connections, leave the chair unplugged and ask the maker or a repair professional what to do before reconnecting it.
When should you call for lift chair repair?
Call the chair maker or a qualified repair professional if basic power and remote checks don't restore movement, or if the chair stays raised. Stop sooner if you find damaged wiring, a hot plug, unusual sounds, or visible damage to the frame or mechanism.
Have the chair model and details from its power supply or remote ready. Explain whether the chair has power, whether it moves up, and what happens when you press the down button.
If the chair has a service agreement or warranty, ask about approved repair steps before opening it or replacing parts. A repair professional can help identify whether the problem involves the remote, power supply, controls, or actuator.
How do you decide what to do when your lift chair won't go down?
Check the outlet, visible connections, and remote; replace a part only when its compatibility is confirmed, and call for repair if the chair still won't lower. Keep clear of the mechanism and don't force the seat down.
Choose a compatible remote if the handset is the likely problem, or a matching power supply if the chair has lost power and the external adapter is the confirmed cause. If the chair moves only one way, stays raised, or shows signs of damage, contact the maker or a repair professional instead of guessing at a part.
Frequently asked questions
Why won't my lift chair go down?
A lift chair may not lower because it has lost power, a plug or cable is loose, the remote is damaged, or the controls or actuator have a fault. Check the outlet and visible connections, then follow the chair manual.
Stop if you see damage, smell burning, or hear unusual noises.
What should I do if my lift chair is stuck up?
Keep people and pets clear of the chair's moving parts, and don't force the seat down. Check the power connections and remote only if you can do so safely.
If the chair stays raised, contact the manufacturer or a qualified repair professional for help lowering it.
Can I use another lift chair remote?
Use a replacement remote only when it matches the chair's connector and control system. The Hommoat remote is intended for devices with a 5-pin actuator plug, but that doesn't confirm compatibility with every chair.
Check the manual or ask the chair maker before ordering.
When should I stop troubleshooting a lift chair?
Stop if a cable is frayed, a plug is hot, you smell burning, the chair makes unusual sounds, or its frame or mechanism looks damaged. Unplug it if you can reach the plug safely, keep clear of moving parts, and contact the manufacturer or a repair professional.
About this guide: Our look at fixing a lift chair that will not lower draws on maker specs, materials and what owners report. See how we research.






