9 Best Replacement Feet and Leg Extenders for Shower Chairs (November 2026)
The best shower chair rubber feet replacement include the Anxingo 8 Pack 1-1/8" Tubing Rubber Tips for standard replacement, the MINIVON 4 PCS Replacement Feet Caps for a broad suction cup base, and the supregear Shower Chair Leg Caps for beveled tips.
On this page (5 sections)
The Anxingo 8 Pack 1-1/8" Tubing Rubber Tips is the best shower chair rubber feet replacement for many standard chairs, with a 1-1/8 in inside diameter and drainage holes. If you need to raise the seat, look at compatible adjustable leg tubes instead of trying to add height with rubber caps.
Measure the chair legs before ordering. For seat dimensions and height, see the shower chair size and height guide.
A cap that is too loose can shift, while one with too small an opening may not fit over the tube.
Bathroom feet are a small part, but they meet the wet floor directly. For broader planning, read our bathroom safety for seniors guide and compare shower chair types if you're still choosing a seat.
Our picks at a glance
-
1
Best for standard replacementAnxingo 8 Pack 1-1/8" Tubing Rubber Tips
9.6/10 our score
See it on Amazon -
2
Best for a broad suction cup baseMINIVON 4 PCS Replacement Feet Caps
9.5/10 our score
See it on Amazon -
3
- 4
Check itMINIVON 4 Packs Replacement Feet Pads
Best for a wide angled base - 5
Check itMESINURS Toilet Chair Safety Replacement Feet
Best for smooth bathroom floors - 6
Check itGraham-Field 9295A Lumex Suction Cups
Best for compatible Lumex benches - 7
Check itYoblink Replacement Feet for Shower Chair Bath
Best for 1 in tubing - 8
Check itGeneric Foot Tube and Suction Cup Tips
Best for adjustable seat height - 9
Check itCarex Walker and Bath Bench Tips
Best for simple 1-1/8 in caps
Which shower chair rubber feet replacement is the best fit?
The Anxingo tips are the strongest general pick for compatible 1-1/8 in tubing, while the other options address wider bases, specific bench models, 1 in legs, or adjustable height. We compared stated fit, base design, materials, pack contents and how closely each option matches the need to replace a worn foot.
Our score weighs specs, features and buyer feedback against what you're shopping for. These scores reflect the fit of each option for this purpose, not a guarantee that a replacement foot will fit every chair.
| Product | Best for | Tube fit | Bottom diameter | Pack size | Our score |
|---|---|---|---|---|---|
| Anxingo 8 Pack 1-1/8" Tubing Rubber Tips | standard replacement | 1-1/8 in inside diameter | About 2 in | 8 tips | 9.6 |
| MINIVON 4 PCS Replacement Feet Caps | a broad suction cup base | 1-1/8 in inside diameter | 3.75 in | 4 caps | 9.5 |
| supregear Shower Chair Leg Caps | beveled tips | 1-1/8 in inside diameter | 8 caps | 9.4 | |
| MINIVON 4 Packs Replacement Feet Pads | a wide angled base | 1-1/8 in inside diameter | About 4 in | 4 pads | 9.3 |
| MESINURS Toilet Chair Safety Replacement Feet | smooth bathroom floors | 1-1/8 in inside diameter | 4 feet | 9.0 | |
| Graham-Field 9295A Lumex Suction Cups | compatible Lumex benches | 1 pair | 8.7 | ||
| Yoblink Replacement Feet for Shower Chair Bath | 1 in tubing | 1 in inside diameter | About 3.6 in | 4 pads | 8.5 |
| Generic Foot Tube and Suction Cup Tips | adjustable seat height | 8.2 | |||
| Carex Walker and Bath Bench Tips | simple 1-1/8 in caps | 1-1/8 in tubing | 4 tips | 7.9 |
Anxingo 8 Pack 1-1/8" Tubing Rubber Tips: Best for standard replacement
- 1-1/8 in inside diameter
- About 2 in bottom diameter
- TPR rubber with metal insert
- Drainage holes
- 8 tips
A straightforward replacement option for compatible 1-1/8 in tubing. Its wider base has drainage holes, and the 8-piece pack can cover more than one chair.
Pros
- Eight tips in the pack
- Drainage holes
- Metal insert reinforces the rubber
Cons
- Measure tubing before ordering
- Not an adjustable leg extender
The Anxingo set is the most flexible choice when you need several standard replacement feet. It includes 8 rubber tips with a 1-1/8 in inside diameter, a size used by many bath chairs and benches.
For chairs built for higher capacities, compare heavy-duty shower chairs.
The base is about 2 in across and has drainage holes. Anxingo describes the material as TPR rubber with a reinforced metal insert, features aimed at traction and wear.
Check the tubing diameter and the shape of your current feet before ordering.
The larger pack can be useful if you want spares on hand or need to replace feet on more than one compatible item. The conical shape and angled-leg design are intended to spread weight over a broader area than a narrow tube end.
This is a cap replacement, not a way to change seat height. After fitting all the feet, set the chair on a level floor and check that each base makes full contact.
MINIVON 4 PCS Replacement Feet Caps: Best for a broad suction cup base
- 1-1/8 in inside diameter
- 3.75 in bottom diameter
- Metal reinforcement
- Drainage holes
- 4 caps
The broad 3.75 in base spreads contact over more floor area than a compact tip. Check that the larger footprint fits around your chair and bathroom layout.
Pros
- Large bottom footprint
- Drainage holes
- Made for 1-1/8 in tubing
Cons
- Measure carefully before ordering
- Four caps may not suit chairs with a different leg count
MINIVON's 4 PCS Replacement Feet Caps stand out for their 3.75 in bottom diameter. That wider base may suit a buyer who wants a larger footprint than a conventional narrow cap, provided the feet clear the shower floor area and the chair legs match the 1-1/8 in opening.
The caps have a reinforced metal insert and drainage holes. MINIVON describes them as tool-free to install by inserting the metal tube into the rubber foot.
Measure the tube itself rather than relying on the chair's model name.
Four caps come in the set, which suits a four-legged chair. If your chair has a different number of contact points, check the count before choosing it.
The large footprint is the main tradeoff. It may extend into a tight corner or sit across grout lines, so look at the space around each leg as well as the tubing size.
supregear Shower Chair Leg Caps: Best for beveled tips
- 1-1/8 in inside diameter
- Beveled design
- Drainage holes
- Metal washers
- 8 caps
These caps combine a beveled shape with drainage holes and a metal washer. They suit buyers whose chair has compatible 1-1/8 in tubing.
Pros
- Eight caps in the pack
- Drainage holes
- Tool-free installation
Cons
- Confirm tubing diameter first
- No seat-height adjustment
The supregear caps pair a beveled design with drainage holes and a metal washer. They are made for 1-1/8 in tubing, so they are a possible match when you want a replacement with a sloped profile.
The pack contains 8 caps. That gives you enough for a chair with four legs and extra replacements, or for multiple compatible seats.
The wide bottoms and drainage openings are features intended to help water move away from the contact area.
Installation is described as tool-free: slide each cap onto its chair leg. Still, the tube diameter and cap shape need to match your chair.
Do not assume that a similar-looking foot will fit just because both are sold for shower chairs.
Choose this set if the beveled shape suits your current chair and you want extra caps. It does not extend the legs or adjust the seat height.
MINIVON 4 Packs Replacement Feet Pads: Best for a wide angled base
- 1-1/8 in inside diameter
- About 4 in bottom diameter
- Angled design
- Drainage holes
- Metal insert
The wide, angled feet are intended to spread contact over a larger area. Check floor clearance and chair-leg size before replacing the existing caps.
Pros
- Wide bottom design
- Drainage holes
- Made for 1-1/8 in tubing
Cons
- Large footprint may not fit every space
- Four pads per pack
MINIVON's 4 Packs Replacement Feet Pads have an about 4 in bottom diameter and an angled design. They are intended for 1-1/8 in tubing, with drainage holes and a metal insert.
The broad feet may be useful when you want a larger base on each leg. Their size also makes measuring the surrounding floor important.
Check for contact with the tub wall, shower curb or other chair legs, and consider whether each base will sit flat on the surface.
The pack includes 4 pads. MINIVON describes the rubber feet as tool-free to replace by inserting the tubing and turning it to the right angle.
Match the number of feet to your chair and inspect each connection after installation.
Choose these when the chair fits the opening and the wide base works in your space. For compact corners or surfaces with grooves, compare the smaller-footprint Anxingo option first.
MESINURS Toilet Chair Safety Replacement Feet: Best for smooth bathroom floors
- 1-1/8 in inside diameter
- 4 in outside diameter
- Suction cup base
- Latex-free rubber
- 4 feet
A 4 in suction cup base is intended to add grip on smooth bathroom surfaces. Match the inside diameter to your chair's tubing before choosing it.
Pros
- Suction cup base
- Latex-free rubber
- Tool-free installation
Cons
- Confirm the chair has compatible 1-1/8 in legs
- No adjustable height
MESINURS describes these replacement feet as having a 4 in suction cup base for smooth bathroom surfaces. The inside diameter is 1-1/8 in, and the feet are made from latex-free rubber.
The four-piece pack fits a four-legged chair when the tubing size and attachment style match. The suction cup design is intended to add grip on smooth surfaces, but it cannot make every floor suitable.
A textured or uneven area may keep a cup from sitting flat.
Installation is described as tool-free. Check that all four caps are fully seated and that the chair stands evenly before anyone sits down.
If the chair still rocks, remove it from use and recheck the fit.
This is a reasonable option for buyers who specifically want a broad suction cup base. Measure carefully, since a similar product made for a different tube diameter may not attach securely.
Graham-Field 9295A Lumex Suction Cups: Best for compatible Lumex benches
- Suction cup feet
- Rubber with metal insert
- Screws into bench leg
- Sold as 1 pair
These feet are specifically compatible with several Lumex transfer bench models. Confirm your bench model and attachment style before buying.
Pros
- Named compatibility with five Lumex models
- Metal insert
- Suction cup design
Cons
- Only one pair included
- Model compatibility matters
The Graham-Field 9295A Lumex Suction Cups are the most model-specific choice here. They are compatible with Lumex transfer bench models 7927A, 7929, 7955A, 7956A and 7958A, and attach by screwing into the bench leg.
The set includes one pair, rather than four feet. That makes it important to check how many replacements your bench needs and whether its attachment matches this style.
The rubber feet have a metal insert and a suction cup design.
If you have one of the named benches, model compatibility can make this an easier match than choosing a universal cap by tube diameter alone. For another brand or model, confirm the fit before buying.
These cups replace feet; they do not raise the bench. If you need a different seat height, use only an adjustment method the bench maker approves.
Yoblink Replacement Feet for Shower Chair Bath: Best for 1 in tubing
- 1 in inside diameter
- About 3.6 in bottom
- Sloping design
- Metal inserts
- 4 pads
Unlike most picks here, these feet are described for 1 in tubing. Measure first, since a different tube size can leave a cap loose or prevent installation.
Pros
- Option for 1 in tubing
- Wide sloping base
- Four pads included
Cons
- Not for 1-1/8 in tubing
- No drainage hole
Yoblink's replacement feet are the option for 1 in tubing, while most other picks in this roundup are sized for 1-1/8 in legs. The stated bottom is about 3.6 in across, with a sloping shape and metal inserts.
Measure the tubing carefully before considering these caps. A one-eighth-inch difference can matter when a rubber foot needs to slide over a metal tube and stay in place.
One useful detail is that these feet do not have drainage holes. That may matter if water tends to collect where the cap meets the floor.
The set has four pads, and installation is described as connecting the stool legs to the rubber feet without tools.
Choose Yoblink only when the 1 in inside diameter matches your chair. If your legs measure 1-1/8 in, select a compatible option instead.
Generic Foot Tube and Suction Cup Tips: Best for adjustable seat height
- Replacement aluminum leg tubes
- 1 in tube diameter
- Five height settings
- Suction cup tips
This set replaces leg tubes and adds five height settings, so it addresses seat height as well as worn feet. Check the chair's leg connection and dimensions before buying.
Pros
- Five height settings
- Includes aluminum tubes and suction cup tips
- No tools required for installation
Cons
- Replaces leg tubes, not just rubber caps
- Check compatibility with the existing chair
The Generic Foot Tube and Suction Cup Tips are for buyers who need replacement leg tubes and adjustable height, not just new rubber caps. The set uses aluminum tubes with rubber suction cup tips and offers five height settings spaced 2.25 cm apart.
The stated tube diameter is 1 in. Check the chair's leg connection and existing dimensions before ordering, since the set is described for standard toilet safety rails and shower chair benches.
It is a different kind of replacement from the rubber-only feet above.
Height adjustment can help you set a chair to a more suitable level, but the chair must remain stable and within the equipment maker's fit guidance. Adjust every leg to the same setting and check that the chair rests evenly before use.
Choose this set only if a compatible tube replacement is what you need. If the leg tubes are sound and only the rubber ends are worn, a matching cap is simpler.
Carex Walker and Bath Bench Tips: Best for simple 1-1/8 in caps
- Fits 1-1/8 in tubing
- TPR rubber
- 4 tips
These simple TPR tips fit 1-1/8 in tubing and can replace worn caps when the chair does not need a larger base or added height.
Pros
- Fits common 1-1/8 in tubing
- Four tips included
- Simple replacement style
Cons
- No stated drainage holes
- Not an adjustable leg extender
Carex Walker and Bath Bench Tips are simple rubber replacements for 1-1/8 in tubing. The four tips are made of TPR rubber, making them a basic option when the original chair feet are worn and you do not need a wider base.
Before buying, measure the tubing and compare the shape of the existing foot. The details identify the fit and material, but do not specify a drainage hole or a suction cup design.
If either feature matters for your floor, select a cap that names it.
These caps also do not adjust seat height. They are best viewed as straightforward replacements for matching tubes, rather than a way to change how the chair sits.
Once installed, check that each tip reaches the end of its leg and that the chair does not rock. Replace feet as a set when uneven wear leaves the chair unstable.
How do you measure shower chair replacement feet?
Measure the outside diameter of the metal leg tube and compare it with the replacement foot's inside diameter. The products here include options for both 1 in and 1-1/8 in tubing, so a quick measurement can prevent a poor fit.
Also check how the current foot attaches. Some caps slide over tubing, while the Lumex suction cups screw into compatible bench legs.
If you have the chair's manual or model number, use it to confirm the replacement style.
Measure the base width as well. A 3.75 or 4 in foot may extend farther than the original and could sit too close to a wall, curb or another leg.
Should you replace feet or add leg extenders?
Replace the feet when the rubber is damaged, loose or worn, and the seat height already works for you. Choose adjustable leg tubes only when you need a height change and have confirmed that the tubes fit your chair.
A replacement cap does not safely raise a chair just because it has a wider or thicker-looking base. Do not stack caps, add loose spacers or mix feet of different heights.
Uneven contact can make a chair rock.
The Generic adjustable tube set is the one option here that describes five height settings. Compare chair types in our shower chair vs shower stool guide and learn how shower chair cost varies if you are weighing replacement parts against a new seat.
What should you check after installing new chair feet?
Check that each cap is fully attached and that all feet touch the floor evenly. Press down on the seat from different sides and look for movement before using the chair.
Keep the feet and floor free of soap residue, hair and debris. Inspect rubber regularly for cracks, splits, loose connections or a base that no longer sits flat.
Replace damaged parts promptly and follow the chair maker's instructions.
If you are comparing a seat with a larger bathing surface, our guide to shower chair or bench choices explains the difference. For people planning around other mobility needs, see Best Mobility Scooters for Leg Amputees, and browse our best shower stool for shaving legs guide for a different seating use.
Which replacement feet should you choose?
Choose the Anxingo tips for a standard 1-1/8 in replacement and extra caps, the MINIVON wide-base feet when their larger footprint fits your floor, or Yoblink when your tubing measures 1 in. For adjustable height, consider compatible replacement tubes and verify the fit before installation.
Measure first, match the attachment style, and check that the chair sits evenly after the change. If replacement parts do not fit or the chair remains unstable, stop using it and contact the chair maker about a compatible repair.
Our top 3 picks at a glance
-
1
Best for standard replacementAnxingo 8 Pack 1-1/8" Tubing Rubber Tips
9.6/10 our score
See it on Amazon -
2
Best for a broad suction cup baseMINIVON 4 PCS Replacement Feet Caps
9.5/10 our score
See it on Amazon -
3
Frequently asked questions
How do I know which shower chair replacement feet fit?
Measure the outside width of the chair's metal tubing, then compare it with the replacement feet's inside diameter. Many options here fit 1-1/8 in tubing, while the Yoblink caps fit 1 in tubing.
Also check the attachment style and whether a wider base will clear nearby walls or fixtures.
Can replacement feet make a shower chair taller?
Rubber caps replace the contact point at the floor, but they aren't a safe way to raise the seat. For a height change, use compatible adjustable leg tubes, such as the five-setting tube set here, and confirm they fit your chair before installation.
When should I replace shower chair rubber feet?
Replace a foot if it is cracked, split, loose, worn smooth or missing. Check all legs together because uneven feet can make the chair rock.
After fitting replacements, press down on the seat and check that every foot sits flat before use.
Are suction cup feet right for every shower floor?
Suction cup feet are designed to grip smooth surfaces, but the floor and cup must be clean and in good condition for contact. Texture, grout lines, or a damaged cup can affect how it sits.
Follow the chair and replacement-foot instructions, and stop using a chair that rocks.
About this guide: Our look at shower chair rubber feet replacement draws on maker specs, materials and what owners report. See how we research.



